Product Details

features

• Touch Screen operation
• Patient plate conductivity monitoring
• System ( PP – CMS )
• Accessories contact detection during
• Plug – in and operation
• MultipleModes – 1 Pure Cut, 1 Precise Cut
• 5 Blend, 3 EndoCut, 2 Spray, 2 Fulgurate
• 1 Desiccate, 1 Bi-Cut, and 2 Bi-coag modes
• 100 Programs memory
• Manufactured and tested : IEC 601-1 / EN 60601-1

description

• Patient plate conductivity monitoring system (PP – CMS)

  The advanced monitoring system gives a Real Time indication of the quality of the conductivity via the patient plate. There are 3 indicators. H = High contact and good conductivity. M = Medium Contact and medium conductivity. L = Low contact and poor conductivity. This Feature enables the monitoring of contact quality and hence significantly reduces the chances of plate failure resulting in burns.

• Accessories contact detection during plug in and operation

  Accessories are detected during plug in and indicator for the footswitch turns red with words “FS” indicating that the same are ready for operation. During Press mode the indicator turns greed showing which mode has been activated, reducing chances of wrong mode operation.

• Multiple modes for superior functionality

  Multiple Modes – 2 Cut modes, 5 Blend modes, 3 EndoCut modes, 2 Spray modes, 2 Fulgurate modes, 1 Desiccate mode, 1 Bi-Cut mode, 2 Bi-coag mode and 1 Seal mode for all types of procedures and all types of desired settings for superior performance.

• 100 Programs memory
  100 program memory to save all desired settings for all different cases. Recall on program selection